Cable Prep - Cable Prep Crimp Cradle

The CRIMP CRADLE uses a highly efficient tooling set which provides a mechanical advantage, when hand crimping, of approximately 10 to 1.

If a hand tool requires 20 Newtons of operating force the Crimp Cradle will require only 2 Newtons to perform the same operation.

Clamps in the base of the unit, in conjunction with two roller bar tool holders, can be raised lowered or rotated to accommodate 90% of all hand crimp tools available. This includes both single and double arm movement tools. A single adjustable clamping mechanism attaches to the upper handle of the crimp tool.

BENEFITS

Can double the output of hand crimping operations due to less handling and shorter cycle times. Reduces fatigue due to 90% less effort. F Greatly reduces risk of Repetitive Strain Injuries. Squeeze force judgement is eliminated as tool reaches a positive stop position at the end of each operation cycle. Reduces rejects due to insertion difficulties when compared to conventional hand use. Safer than many small bench pneumatic tools and a fraction of the cost!

FEATURES

Safe, fast, one hand operation. Manual operation, no power or compressed air required. Portable, easily bench mounted by clamps or can be bolted down for permanent siting. Rugged lifetime construction. Quick and simple to set up and adjust. Hand tool calibration unaffected.

TECHNICAL DATA

The Crimp Cradle will accept hand tools with an open span between handles of up to 305mm.
The unit weighs 2.5 Kg.

Cable Prep Crimp Cradle Force Reduction Tool

Cable Prep Crimp Cradle
Force Reduction Tool