Cable Prep DPF-1000
Low Cost, Fast & Accurate Wire Stripper & Twister

Stripping Head Detail

A precision hinged carbide blade is centrifugally operated to produce a precise stripping action To strip a wire simply insert into the unit and withdraw.

Blade setting is locked into place with no chance of adjustment drift or conductor damage. On stranded wires the removal of the insulation slug leaves the strands neatly twisted for termination or soldering.

The DPF1OOO is fully guarded for operator protection and includes an automatic motor cut-out if the Stripping Head Guard is inadvertently removed

Simple Set-Up and Stripping Operation

• Select a Wire Guide for the correct wire diameter (SEE CHART)
• Insert into Stripping Head and lock into place with Locking Screw
• Loosen Blade Block Locking Screw and set blade to conductor thickness
• Set Strip Length Stop to required stripping length
• Insert wire into Stripping Head until it touches the length stop, pause momentarily then withdraw wire
• If the blade contacts the conductor(s) or the insulation slug is not removed adjust blade in or out as required and repeat test strip