Cable Prep - KODERA CASTING C353F

Machine is equipped with option

OPTION

Kodera_casting_csl503.JPG (14663 bytes)

CSL-503
SLITTING MACHINE FOR FLAT CABLES
CSL-503, which has been developed as a special optional item only for the C353F, can make a slitting processing on the ends of flat cable. Maximum wire width is 40mm. Maximum combined slitting length at front and rear ends of cable is up to 200mm. The ratio of front and rear slitting lengths can be adjusted very simply and quickly.

Special Purpose Machine for Flat Cable Processing

C353F is a special purpose machine for flat cable processing based on C353. Since C353F inherit powerfulness from C353, it can process a flat cable up to 40mm in width. It covers not only flat cable processing widely. Needless to say, it is superior in performance, safety and convinience.

Dimensions
Weight
Power Supply
Power Consumption
Cutting Length
Cutting Tolerances

Stripping Length

Applicable Wires

Wire Feed Speed
Blade Material

430 x 510 x 230 mm
35 Kg
100/110/220 V, 50/60 Hz
80-220 W
0.1mm ~ 99999mm
within+-(0.2+0.002xL)mm
L=cutting length
Front 0.1~48mm
End 0.1~48mm
VSF, IV, KV, Teflon,
Glass wire, etc.
AWG 4~28
OD 11mm max
Variable
Ultra fine grain alloy

For specifications and general information about the Casting series click here

KODERA CASTING C353F Automatic Cut and Strip Machine

KODERA CASTING C353F
Automatic Cut and Strip Machine