KIRSTEN PP3 WS
Pneumatic Wire Stripper and Wire/
Weather Seal Crimping Machine

Kirsten PP3 WS



The banded terminals can be left transversal or longitudal (rear) feed.  A seal scraper ensures the exact position on the wire before stripping and crimping.



With a bowl feeder and sorter the weather seals are brought into correct position.   Quick change over of bowl feeder, sorter and tool.



A programmable controller for the pneumatic system secures the process and its reproducibility.





Quick Change-Over Tool System

• Two types of tools depending on banding: left transversal or longitudinal (rear) feed.
• Tool change with 2 screws only.
• Exact stepless adjustment of crimping height in seconds.
• Insulation crimp separately adjustable in tool.
• Stripping unit is part of the machine, no need to be exchanged.
• Wearable parts are made of special hardened tool steel.
• Exchange of wearable parts is very easy and fast due to "dove-tail" type guiding.
• Tools are made according to specifications from terminal manufacturers individually for each terminal. No limitations in the selection of terminals.

Pneumatic Wire Stripper and Wire/Weather Seal Crimping Machine

PP3 SL for transversal left and longitudinal feed terminals

Weather seals are automatically positioned and placed on wire

For cross sections from 0.5-1.5 mm² (20-15 AWG)

The Flexible One

• Addition of an automatic sorter and feeding unit with automatic positioning and placement of weather seals.
• Upon touching the sensor with the wire initiating the machine, the weather seal is placed on the wire and exactly positioned in the crimping position.
• Secured process.
• Due to an intelligent, semi-automatic process, several operations are safely and reliably executed simultaneously with accuracy.
• Most components are of the standard PP3, which minimises spare parts stocks.

 

Conductor Gauge Air Pressure Air Consuption per Cycle Stripping length Sheathing Length Reel Diameter (max) Reel Width (max) Overall Dimensions Overall Weight Noise Level Electrical Data

0.5-1.5 mm sq 5-6 Bar 2.5 litres at 5 Bar max 12 mm min 30 mm 720 mm 160 mm 520 x 560 x 480 mm 40 Kg 75 dBA 220 V / 50 Hz 110 V / 60 Hz

Safety regulations according to DIN 31001.
The PP3 machine is constructed on a toggle press principle. Upper and lower part of the tool move in opposite directions toward the conductor.
The machine cycle is initiated by sensor or foot switch for special applications.



There are more than 17000 KIRSTEN tools for over 3000 terminal types in use worldwide.   These include terminals of all major suppliers: